RFID tags, and smart labels as well as the RFID tagging techniques provide the remote nodes of devices with which the readers and writes communicate.
Typically the tags and smart labels are low cost items that can be attached to an item, and often they may be disposable. One of the great advantages of RFID is that the tags and labels are often very low cost items.
The tags can be totally passive and some can also be active as well. In some instances they may include storage so that the transactions made with these tags or smart labels can require information to be stored on them to provide more functionality, etc.
RFID tag elements
RFID, Radio Frequency Identification tags are made to be as simple as possible and they contain comparatively little in the way of electronics. Fundamentally they comprise two main elements:
- Electronics circuitry: The electronics within an RFID tag are kept to the minimum to ensure that cost are minimised and power levels are kept as low as possible.
- Antenna: The antenna within the RFID tag is the element that takes the largest amount of space. It must be able to operate satisfactorily at the frequency of operation. With wavelengths being smaller at higher frequencies (especially UHF and microwave), this makes antennas for these frequencies much more efficient.
RFID tag types
RFID tags or RFID transponders can take a variety of forms. There are three main categories into which they fall:
- Passive: Passive RFID tags are by far the most common. They do not contain any power and receive this from the RFID reader. This is sufficient to power any device in the RFID tag and reply with the required data.
The so called RFID smart tags, or RFID smart labels are all passive.
- Semi-passive: This form of RFID tag uses a battery to supply the internal operation of the tag, but relies on the RFID reader to supply the power to transmit the signal to the reader.
- Active: An active RFID tag is one in which battery power is used to supply power to the electronics. This enables greater distances to be achieved as the tag is not dependent upon the received power to provide a reflected signal, and the control and processing circuits can be more sophisticated as in the case of the semi-passive RFID tag.
Advantages and disadvantages of active and passive RFID tags
When choosing an active or passive tag, it is necessary to determine its requirements and whether an active RFID tag or a passive RFID tag is needed.
Some of the advantages and disadvantages of active and passive RFID tags are tabulated below:
Active RFID tags:
Passive RFID tags:
Read only and read-write RFID tags
RFID tags may be able to either perform as a read only RFID tag, or they may be a read-write Radio Frequency Identification tag. In view of the cost of manufacturing different types against the quantities made and the differences between the two, most RFID tags today are the read-write variety, and for applications where only a read function is required, the write ability is not used.
Read only radio frequency identification tags are typically programmed either in the factory. Data included will be a unique identifier and other specified data that cannot be changed.
Read-write RFID tags normally contain an area where data cannot be altered - this is often a segregated secure read-only area in the memory. Again this will include a unique identifier, and other data that may be required. The writeable area can then be used to contain data that may be required. For example if the RFID tag is used with a container, it can contain details of the container contents, etc. This area of memory within the RFID tag can be re-written many times.
RFID tag storage and processing
One important area and function of the RFID tag is the area that handles the information storage and processing. RFID tags range vastly in their capabilities as some do not have their own power, relying on the received signals to provide any power and this limits their abilities. Other RFID tags with their own battery power are able to carry out far more sophisticated tasks.
There are several types of RFID tag that may be used:
- One-bit EAS RFID tags: EAS (Electronic Article Surveillance) tags are commonly found in shops and stores to prevent theft. EAS tags are often termed "1 bit" tags. The reason for this is simply that they are only designed to communicate one bit of information, i.e. their presence. They are widely used in anti-theft measures in shops and stores. If the RFID tag is present and active, then it means that the item has not been through the checkout. If they have been passed through the checkout the RFID tag is either deactivated or removed.
Because of their use, EAS tags are used in their millions and possibly the most widely used form of RFID tag. They do not have any memory or other chips as these would make them too expensive. Coupling used for these tags is generally inductive or backscatter. The tags simply consist of a resonant circuit, and the reader is able to detect their presence. A further point to note about EAS tags is that the readers have to sweep across a small frequency band, because the manufacturing tolerances of these RFID tags is such that there is a spread in the resonant frequencies of the different tags.
- RFID smart labels : Smart labels are simple RFID tags that are embedded in a an adhesive paper label. The advantage of this form of tag is that they can be used by RFID and barcode readers as well as having the option for human readable characters. They can be used in areas where the end product may enter one of a number of scenarios where the form of reader is not known - for example retail outlets a product may be shipped to may have either a barcode reader or an RFID reader, and outlets will have different options. Therefore to cover all eventualities a combined RFID and barcode tag is printed.
- Smart card tags: Smart card tags are different to smart labels. Advanced smart card tags are used for many applications, and in particular where secure communications is required, for example for transactions involving finance. These cards may have complicated processors on board along with sufficient memory. When using these cards there is a balance to be made between functionality and cost - this needs to be taken at the outset of the design and needs to be carefully balanced.
There is often more to an RFID tag or smart label than first meets the eye. Some are very simple and cheap disposable items used for reducing shoplifting of high value items. However other tags and smart labels can provide much higher levels of interaction, enabling complex asset tracking and production management etc. Whilst the cost of some smart labels will be much higher than the very cheapest tags, they can provide higher levels of functionality and be re-usable. As such they are likely to pay their way many times over.
Wireless & Wired Connectivity Topics:
Mobile Communications basics2G GSM3G UMTS4G LTE5GWiFiIEEE 802.15.4DECT cordless phonesNFC- Near Field CommunicationNetworking fundamentalsWhat is the CloudEthernetSerial dataUSBSigFoxLoRaVoIPSDNNFVSD-WAN
Return to Wireless & Wired Connectivity